Effective management of storm water is crucial when it comes to preventing contaminants from polluting local rivers, lakes and streams. In addition, if you operate a business, it is highly likely that you are covered by a storm water discharge permit. This could be a general permit under which your requirements are the same as other facilities that fall within your business sector. It could also be an individual permit whereby your requirements and discharge limitations are customized for your particular situation. Regardless of which type of permit you have, there are some basic activities you can do to make storm water pollution prevention easier.
Maintain Your Retention Pond
In many cases, storm water that flows from the parking lot and roof of the building may be routed toward a retention pond where it accumulates before it actually exits the property. Normally, these ponds have one or more discharge outlets that are located a few feet from the bottom of the pond. Only when the water in the retention pond reaches that height will it actually begin to discharge to a local stream. Therefore, most of the water simply soaks into the ground.
Some simple maintenance tips for these retention ponds, if you have them, include controlling the growth of vegetation inside the pond. This makes it easier to keep an eye on the condition of the pond. These areas should especially be kept free from the growth of trees and shrubbery. The space these types of plants occupy will actually decrease the holding capacity of the pond. In addition, their roots can weaken the pond’s walls. Companies like Atlanta Aquatics can provide valuable assistance if you need help with storm water management Atlanta Ga.
Keep Non-storm Water Out of Storm Water
With a few exceptions, regulations do not allow for water from the business operations to be mixed with storm water in order to discharge it. This this includes water that comes in contact with the material being produced by the business, water from mopping the floors and water from drinking fountains along with many other sources. Water from these sources is discharged through a separate system and is normally routed to the local water treatment facility. Storm water is simply the water that falls from the sky during a rain event.
In short, the runoff of storm water from your place of business is something that is easy to ignore. Keep in mind, however, that it is likely that your operation may fall under regulations that are in place to prevent the pollution of local water bodies. You should double check to see how these regulations apply to you.
Water is one of the simplest chemical compounds on the planet. However, water is the most important component of life. Life is impossible without water. The human body is composed of approximately 70 percent water. That being said, water can do a lot of damage to the human body if it is not properly filtered and purified. Contaminated water can include things like parasites, chlorine, and fluoride, which can damage the human body.
Why Is Water Filtration so Important?
Water can be found all over the planet. Unfortunately, many sources of fresh water have been contaminated by pollution and garbage. This has made the water unfit for human consumption. Before a person can drink this water, it needs to pass through a series of purifiers to reduce or remove pollutants. Water filtration will also improve the way the water tastes. It especially does this by removing the metallic taste of chlorine.
Some people may argue that they have been drinking water that has not been filtered for a very long time and are never sick. The truth is that while these individuals may have been drinking contaminated water for years and while they may not currently show symptoms of disease or sickness, this does not mean that toxins are not alive and active in their body.
Some waterborne illnesses take time to manifest symptoms. However, the truth is that around the world millions of individuals suffer on a daily basis from diseases that range from botulism to polio to dysentery because the water they drink has not been properly treated.
Methods to Purify Water
There are two primary techniques that are used to treat water in the United States. The first is distillation. The basic idea behind this process is that water is heated until it boils and then the steam is captured and cooled. The idea is that many of the impurities do not evaporate with the steam. So when the steam is cooled, the water produced is purified.
A reverse osmosis water purifier is the most common form of water purification used in the United States. It is cost effective and allows a business owner or homeowner to remove a good portion of the biological and chemical contaminants in their water supply. Some of the benefits of reverse osmosis purification is that it produces no byproducts, does not alter the taste of the water, and leaves no chemical residue in the water.
Water purification is a serious thing. Failure to properly purify water can negatively affect the health of individuals. However, purified water can improve the health and life quality of the individuals who drink it.
When you are in the midst of moving, it is important that your house plants are protected. Plants are very vulnerable to moves are they are often exposed to extreme temperatures and lack of water.
If you are moving during the colder months, be sure that your plants are more on the dry side than moist. You can achieve this buy watering your plants 2-3 days before the move and then not watering them again until after the move. If you happen to be moving during the months it is warmer, you want to water your plants the day that you move and allow the extra water to drain.
It is much easier to protect plants from the cold than it is to protect them from the heat. If you are transporting them in the car, be sure that you transport them on the passenger side of the car. It is recommended that you not use the trunk but if you find that you absolutely have to, it is important that you cover the boxes with blankets so they are protected from the heat or cold.
Plants may not react well to suddenly being placed in a dark box. When transporting plants, it is important that you get your plants used to the dark at home. You can do this by adding a sheer curtain to the window that the plants are on about a week before moving in order to reduce the light.
In order to avoid parasites from getting into your plants, be sure that put your house plants in a plastic bag that is dark. Add a bug strip inside and allow the bag to set in a shaded area for several hours. You want to do this about two weeks before moving day.
Other helpful tips for moving plants include securing vines that have weak stems with a stake. Large plants should be secured using rubber bands that are placed in the same direction as its growth so you won’t experience breakage.
Two weeks before moving, contact your local flower shop to get information on how to properly prune plants. This makes them easier to manage and easier to pack. A few days before moving day, you will want to place plastic bags inside the boxes you will be using for your plants. This will help to ensure that moisture will not seep through the boxes. To be sure that you plants have the proper ventilation, be sure that you make holes in the boxes as well as the lids.
The day f the move, you will need to wrap newspaper around the plant tops. Secure the lids of the boxes with tape. Be sure that they are packed last in order to prevent crushing or tipping over.