Tanning bed lamps, like you find in up-market tanning beds, are a large part of the mystery of the Hollywood suntan. You can get any type of tan you want with the wide variety of bulbs available on the market for tanning beds. There are several types of lamps, such as deep-tanning lamps, bronzing bulbs, face lamps and plenty of others besides. These high-tech bulbs employ the latest technology to produce a tan evenly, and above all, safely.
Furthermore, there are different types of bulbs for each kind of skin too. The tanning bed industry produces different bulbs for from dark to light skin colours. On top of that, you can decide to have a soft tan, a golden tan, a bronze tan, or the darkest tan imaginable. You can even change the type of bulb, as your tan deepens, so that you can have all kinds of quite stunning results.
A tanning bulb is like having the sun in a tube. In fact, it is even better! Modern tanning bed bulbs are made to the highest standards and are very safe. The sunbed industry and the government have set strict rules to ensure your safety. So, if you follow the instructions supplied with the product carefully, you can feel confident that you will not be risking your health to look good.
The UV rays that they produce are well below the proscribed safety limits to ensure you stay healthy and tanned. Furthermore, there are plenty of choices open to you, varying from UVB and UVA combinations to straight UVA. It is simply up to you. So, why not give the sun a helping hand?
Sun lamps are ultraviolet-emitting devices that act as the main component of the different types of tanning beds and booths on the market. Tanning bed lamps have as their main purpose the enhancement of a cosmetic tan, although these lamps also have a reputation for the successful treatment of eczema and psoriasis. The depth and type of tanning produced depends on the spectrum of light emitted by the tanning bulbs and the vast majority of them produce more ultraviolet light than the sun.
Nearly all tanning lamps use a device called a ‘ballast’ to regulate their power consumption. The ballast stabilizes the flow of electrical energy inside the lamp and is required to ensure that the bulbs use only the necessary amount of wattage that they need in order to work effectively.
There are different types of tanning bulbs on the market including reflector sunbed bulbs and high output bulbs. The majority of lamps fall into two main groups: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs require a lack of oxygen in its housing.
High pressure tanning bulbs range in length from three to five inches and operate with 250 to 2,000 watt ballasts, 400 watt high pressure tanning bulbs are the most common. They are often incorporated in the face tanning component of a tanning bed. High pressure tanning bulbs are made of quartz glass and an additional specialized coating, which is necessary to filter out potentially deadly UVC ultraviolet rays.
HP tanning bulbs contain a small amount of mercury or argon and create ultraviolet light in high amounts. The handling of high pressure tanning bulbs should be performed very carefully and never with naked hands, because even a tiny amount of oil from your hands will cause the bulb to fail prematurely or even break and the resultant spillage of mercury is potentially very serious. High pressure tanning bulbs ought to be replaced after roughly 1,000 hours although they will continue to produce light for up to 10,00 hours
Low pressure tanning lamps are much like fluorescent lights, but the glass that makes up low pressure tanning bulbs naturally filters out UVC ultraviolet rays. Low pressure bulbs have a lifespan of six hundred to sixteen hundred hours of use.
Do you want to find out more about tanning bed bulbs? If so, please visit our website on tanning bed bulbs. Free reprint available from: About Tanning Bed Bulbs.